Technical support email: [email protected]
Sales email: [email protected]
◆ It is fully compatible with the Arduino nano-v3.0 pin and its usage method
◆ BLE chip :TI CC2540
◆ Work channel : 2.4G
◆ Transmission distance: 50m
◆ Supports AT directive to configure BLE
◆ Support USB virtual serial port, hardware serial port,BLE three-way transparent transmission
◆ Support master and slave switch
◆ Supports sending over 20byte.
◆ Supports iBeacons
◆ Interface:Mircor-Usb
◆ Input voltage： Usb power supply,Vin6~12V， 5V
◆ MCU： ATmega328P-MU QFN32
◆ Bootloader： Newest Arduino1.8.8
◆ Pin： Two Lines 2.54mm-15Pin
◆ Size： 48mm x 19mm x 12mm
◆ Weight： 18g
Please refer to the operation manual for driver installation
If the rf-nano driver doesn't properly function, get the latest one from the following website:
Windows
Linux
Mac OS
Android
Arduino IDE 1.8.6 and above Version
