How to set custom values for the consumables (Viomi V6 Converted)

[kmavrov]

Are you already using Valetudo?

Yes, just started

Your questions

Just to summarize my situation. I have Viomi V8 vacuum but decided to make it my own. Since there have been couple of warnings about V8 support decided to get a spare V7 board and put Valetudo on it with V6 firmware from DustBuilder. Everything went perfect and the vacuum is working as expected.

Now to my question:
Is it possible and if it is how to set the real values for the consumables. The board thinks they are all at 100%, while in reality they are not.
I tried to publish to the consumables topic in MQTT and there the values are the correct ones, but the vacuum still thinks they are 100%.

Is there are way to tell the vacuum the real values of the consumables?

[Hypfer]

I wouldn't bother about that. Those are just timers that count down based on usage time.
Reset them the next time you replace consumables and you should be good.

[kmavrov]

Works for me :) Thank you for the quick reply and thank you for the massive effort!