sampleconfig

#  Do server side ipv6-prefix pool management. Should be added in
#  post-auth and accounting sections.
#
#  The module also requires the existence of the Pool-Name
#  attribute. That way the administrator can add the Pool-Name
#  attribute in the user profiles and use different pools for
#  different users. The Pool-Name attribute is a *check* item
#  not a reply item.
#
#  The Pool-Name should be set as a configuration parameter
#  for every module instance. Different modules instances
#  can use the same Pool-Name. Multiple Prefixes can be
#  

#
# Example:
# radiusd.conf: prefixpool students { [...] }
#		prefixpool teachers { [...] }
# users file  : DEFAULT Group == students, Pool-Name := "students"
#		DEFAULT Group == teachers, Pool-Name := "teachers"
#		DEFAULT	Group == other, Pool-Name := "DEFAULT"
#
# ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST *********
# ********* THEN ERASE THE DB FILES                     *********
#
prefixpool framedv6pool {

	#  prefix_start, prefix_stop:
	#	The start and end ipv6 prefixes for this pool.
	#	The prefix length of both values must match.
	prefix_start = 2013::/64
	prefix_stop = 2013:0:0:100::/64

	#  cache_size:
	#	The gdbm cache size for the db files. Should
	#	be equal to the number of ipv6 prefixes available in
	#	the ipv6 prefix pool
	cache_size = 800

	pool_name = "ipv6user"

	# filename:
	#	The main db file used to allocate addresses.
	filename = ${db_dir}/framed_prefix.pool

	# ip_index:
	#	Helper db index file used in multilink
	ip_index = ${db_dir}/framed_prefix.index
	
	# prefix_type:
	# 	Set the IPv6-Prefix type. Possible values are:
	# 	- Framed-IPv6-Prefix (default)
	# 	- Delegated-IPv6-Prefix
	#prefix_type = Delegated-IPv6-Prefix

	# override:
	#	If set, the *-IPv6-Prefix already in the
	#	reply (if any) will be discarded, and replaced
	#	with a *-IPv6-Prefix assigned here.
	#	Note: Prefix types must be the same.
	#	Note: override and append should not be set
	#	to "yes" at the same time.
	override = no

	# append:
	#   If set, the *-IPv6-Prefix will be added as an
	#   additional attribute *-IPv6-Prefix.
	#   Note: Prefix types must be the same.
	#   Note: override and append should not be set
	#   to "yes" at the same time.
	append = no

	# maximum-timeout:
	#	Specifies the maximum time in seconds that an
	#	entry may be active.  If set to zero, means
	#	"no timeout".  The default value is 0
	maximum_timeout = 0

	# key:
	#	The key to use for the session database (which
	#	holds the allocated ip's) normally it should
	#	just be the nas ip/port (which is the default).
	#
	#	If your NAS sends the same value of NAS-Port
	#	all requests, the key should be based on some
	#	other attribute that is in ALL requests, AND
	#	is unique to each machine needing an IP address.
	key = "%{NAS-IP-Address} %{NAS-Port-Id}"
}