info.md

Toon Smart Meter Sensor Component

This is a Custom Component for Home-Assistant (https://home-assistant.io) reads and displays sensor values from the meteradapter connected to a rooted Toon thermostat.

NOTE: This component only works with rooted Toon devices. Toon thermostats are available in The Netherlands and Belgium (Boxx).

More information about rooting your Toon can be found here: Eneco Toon as Domotica controller

Usage

To use this component in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry

sensor:
  - platform: toon_smartmeter
    host: IP_ADDRESS
    port: 80
    scan_interval: 10
    resources:
      - gasused
      - gasusedcnt
      - elecusageflowpulse
      - elecusagecntpulse
      - elecusageflowlow
      - elecusagecntlow
      - elecusageflowhigh
      - elecusagecnthigh
      - elecprodflowlow
      - elecprodcntlow
      - elecprodflowhigh
      - elecprodcnthigh
      - elecsolar
      - elecsolarcnt
      - heat
      - waterflow
      - waterquantity
  powerplugs:
      - KoffieStekker
      - Server

Configuration variables:

• host (Required): The IP address on which the Toon can be reached.
• port (Optional): Port used by your Toon. (default = 80)
• scan_interval (Optional): Number of seconds between polls. (default = 10)
• resources (Required): This section tells the component which values to display, you can leave out the elecprod values if your don't generate power and the elecusage*pulse types if you use the P1 connection.
• powerplugs (Optional): This section holds any connected power plugs, just enter it's name.

If you want them grouped instead of having the separate sensor badges, you can use this in your groups.yaml:

# Example groups.yaml entry

Smart Meter:
  - sensor.toon_gas_used_last_hour
  - sensor.toon_gas_used_cnt
  - sensor.toon_power_use_cnt
  - sensor.toon_power_use
  - sensor.toon_p1_power_prod_low
  - sensor.toon_p1_power_prod_high
  - sensor.toon_p1_power_prod_cnt_low
  - sensor.toon_p1_power_prod_cnt_high
  - sensor.toon_p1_power_use_cnt_pulse
  - sensor.toon_p1_power_use_cnt_low
  - sensor.toon_p1_power_use_cnt_high
  - sensor.toon_p1_power_use_low
  - sensor.toon_p1_power_use_high
  - sensor.toon_p1_power_solar
  - sensor.toon_p1_power_solar_cnt
  - sensor.toon_p1_heat
  - sensor.toon_p1_waterquantity
  - sensor.toon_p1_waterflow

Power Plugs:
  - sensor.toon_koffiestekker_powerplug_power_use
  - sensor.toon_koffiestekker_powerplug_power_use_cnt

Screenshots

Debugging

Add the relevant lines below to the configuration.yaml:

logger:
  default: info
  logs:
    custom_components.toon_smartmeter: debug

Donation