Charger logic error and ignoring inconsisten phases

[hyperbart]

Can somebody explain what the warnings above in fact mean? It is with an Alfen Pro Line

What is the meaning of the following calculation? Where does the 2A come from?
"pv charge current: 0A = 2A + -5.09A (1170W @ 1p)"

[andig]

Das kann niemand ohne Kontext wie Config oder Logfile erklären.

[hyperbart]

The screenshot was made around 15:06, this was the log at that time. Today I had a try out with an Kia eNiro

bart@nas:~$ docker logs EVCC_evcc.1.6mzabyyhx114ob5txxyzbd5bg --tail 0 --follow
[lp-1  ] DEBUG 2022/03/30 14:14:21 charge currents: [11.4 11.7 12.3]A
[lp-1  ] DEBUG 2022/03/30 14:14:21 detected phases: 3p
[lp-1  ] DEBUG 2022/03/30 14:14:21 charger status: C
[lp-1  ] WARN 2022/03/30 14:14:21 ignoring inconsistent phases: 1p < 3p observed active
[lp-1  ] DEBUG 2022/03/30 14:14:21 pv charge current: 0A = 6A + -33.1A (7610W @ 1p)
[site  ] DEBUG 2022/03/30 14:14:21 ----
[lp-1  ] DEBUG 2022/03/30 14:14:22 charge power: 3961W
[site  ] DEBUG 2022/03/30 14:14:22 pv power: 2886W
[site  ] DEBUG 2022/03/30 14:14:22 grid power: 3371W
[site  ] DEBUG 2022/03/30 14:14:22 site power: 3371W
[lp-1  ] DEBUG 2022/03/30 14:14:22 charge currents: [9.26 8.65 7.38]A
[lp-1  ] DEBUG 2022/03/30 14:14:22 detected phases: 3p
[lp-1  ] DEBUG 2022/03/30 14:14:22 charger status: C
[lp-1  ] WARN 2022/03/30 14:14:22 ignoring inconsistent phases: 1p < 3p observed active
[lp-1  ] DEBUG 2022/03/30 14:14:22 pv charge current: 0A = 6A + -14.7A (3371W @ 1p)
[site  ] DEBUG 2022/03/30 14:14:24 ----
[lp-1  ] DEBUG 2022/03/30 14:14:24 charge power: 3163W
[site  ] DEBUG 2022/03/30 14:14:24 pv power: 2894W
[site  ] DEBUG 2022/03/30 14:14:24 grid power: 2931W
[site  ] DEBUG 2022/03/30 14:14:24 site power: 2931W
[lp-1  ] DEBUG 2022/03/30 14:14:25 charge currents: [5.09 4.8 5.1]A
[lp-1  ] DEBUG 2022/03/30 14:14:25 detected phases: 3p
[lp-1  ] DEBUG 2022/03/30 14:14:25 charger status: C
[lp-1  ] WARN 2022/03/30 14:14:25 ignoring inconsistent phases: 1p < 3p observed active
[lp-1  ] DEBUG 2022/03/30 14:14:25 pv charge current: 0A = 6A + -12.7A (2931W @ 1p)
[site  ] DEBUG 2022/03/30 14:14:29 ----
[lp-1  ] DEBUG 2022/03/30 14:14:29 charge power: 3164W
[site  ] DEBUG 2022/03/30 14:14:29 pv power: 2897W
[site  ] DEBUG 2022/03/30 14:14:29 grid power: 2901W
[site  ] DEBUG 2022/03/30 14:14:29 site power: 2901W
[lp-1  ] DEBUG 2022/03/30 14:14:30 charge currents: [4.82 4.82 5.1]A
[lp-1  ] DEBUG 2022/03/30 14:14:30 detected phases: 3p
[lp-1  ] DEBUG 2022/03/30 14:14:30 charger status: C
[lp-1  ] WARN 2022/03/30 14:14:30 ignoring inconsistent phases: 1p < 3p observed active
[lp-1  ] DEBUG 2022/03/30 14:14:30 pv charge current: 0A = 6A + -12.6A (2901W @ 1p)
[lp-1  ] DEBUG 2022/03/30 14:14:31 set charge mode: pv
[lp-1  ] DEBUG 2022/03/30 14:14:31 pv timer elapse
[lp-1  ] DEBUG 2022/03/30 14:14:31 pv timer inactive
[site  ] DEBUG 2022/03/30 14:14:31 ----
[lp-1  ] DEBUG 2022/03/30 14:14:31 charge power: 3196W
[site  ] DEBUG 2022/03/30 14:14:31 pv power: 2897W
[site  ] DEBUG 2022/03/30 14:14:31 grid power: 2909W
[site  ] DEBUG 2022/03/30 14:14:31 site power: 2909W
[lp-1  ] DEBUG 2022/03/30 14:14:32 charge currents: [4.79 4.81 5.1]A
[lp-1  ] DEBUG 2022/03/30 14:14:32 detected phases: 3p
[lp-1  ] DEBUG 2022/03/30 14:14:32 charger status: C
[lp-1  ] WARN 2022/03/30 14:14:32 ignoring inconsistent phases: 1p < 3p observed active
[lp-1  ] DEBUG 2022/03/30 14:14:32 pv charge current: 0A = 6A + -12.6A (2909W @ 1p)
[lp-1  ] DEBUG 2022/03/30 14:14:32 site power 2909W >= 0W disable threshold
[lp-1  ] DEBUG 2022/03/30 14:14:32 pv disable in 0s
[lp-1  ] DEBUG 2022/03/30 14:14:32 pv disable timer elapsed
[lp-1  ] DEBUG 2022/03/30 14:14:32 charger disable
[lp-1  ] DEBUG 2022/03/30 14:14:32 wake-up timer: stop
[site  ] DEBUG 2022/03/30 14:14:34 ----
[lp-1  ] DEBUG 2022/03/30 14:14:34 charge power: 913W
[site  ] DEBUG 2022/03/30 14:14:34 pv power: 2892W
[site  ] DEBUG 2022/03/30 14:14:34 grid power: 501W
[site  ] DEBUG 2022/03/30 14:14:34 site power: 501W
[lp-1  ] DEBUG 2022/03/30 14:14:35 charge currents: [1.8 2.45 1.88]A
[lp-1  ] DEBUG 2022/03/30 14:14:35 detected phases: 3p
[lp-1  ] DEBUG 2022/03/30 14:14:35 charger status: C
[lp-1  ] WARN 2022/03/30 14:14:35 charger logic error: disabled but charging
[lp-1  ] WARN 2022/03/30 14:14:35 ignoring inconsistent phases: 1p < 3p observed active
[lp-1  ] DEBUG 2022/03/30 14:14:35 pv charge current: 1.62A = 3.8A + -2.18A (501W @ 1p)
[lp-1  ] DEBUG 2022/03/30 14:14:35 pv enable timer reset
[lp-1  ] DEBUG 2022/03/30 14:14:35 pv timer inactive

The config:

interval: 5s

site:
- title: Dynamic Charging
  meters:
    grid: HuisMeter
    pvs:
    - pvHuis
    - pvTuinHuis

tariffs:
  currency: EUR # (default EUR)
  grid:
    # static grid price
    type: fixed
    price: 0.42 # [currency]/kWh

  feedin:
    # rate for feeding excess (pv) energy to the grid
    type: fixed
    price: 0.12 # [currency]/kWh

meters:
  - name: HuisMeter
    type: modbus
    model: sdm # specific non-sunspec meter
    id: 1
    energy: Sum # only required for charge meter usage
    #via TCP:
    uri: 192.168.4.184:8899
    rtu: false # serial modbus rtu (rs485) device connected using simple ethernet adapter
  - name: pvHuis
    type: sma
    uri: 192.168.4.230
    password: xxxx
  - name: pvTuinHuis
    type: sma
    uri: 192.168.4.231
    password: xxxxxx


sponsortoken: xxxx

log: debug
levels:
    core: debug

chargers:
- name: ChargingPointAlfen
  type: alfen
  uri: 192.168.4.178 # TCP ModBus address

loadpoints:
- title: Alfen Laadpaal # display name for UI
  charger: ChargingPointAlfen # Wallbox Referenz
  vehicles:
  mode: pv # charge mode (off, now, minpv, pv)
  phases: 3
  mincurrent: 6
  maxcurrent: 16

vehicles:

[hyperbart]

Because I said "only" PV?

[andig]

Es scheint als würde die Phasenumschaltung bei Dir nicht funktionieren. Charger geht auf 1p, lädt aber fröhlich weiter mit 3p. Alternativ: hast Du am Fzg auch Phasen konfiguriert? Den Teil hast Du verschwiegen.

[hyperbart]

I didn't configure a vehicle in EVCC and I haven't set anything specifically in the car itself.
The dashboard showed it was charging at 3.7kW.

[andig]

Da lässt sich nur mit vollständigem Logfile was zu sagen

[hyperbart]

You're right :)
I have exported the logs from that day after a restart up until 15h37.
Github does not allow to paste a file so big so I have used zerobin:
https://zerobin.net/?bc4aa8c9c3110b26#DbNXvZb/rVyhe3LEiaRXUOzYJUxUzZMwzO4R2QSLPfw=