diff --git a/README.md b/README.md
index ed0b79f..053c220 100644
--- a/README.md
+++ b/README.md
@@ -18,10 +18,31 @@ This repository will help you to connect your desk to the internet via the seria
 | ------------------------------------ | -------------------------------------------------------------------------------------------------------------------- |
 | [ESPHome](packages/office-desk.yaml) | Control your desk via an ESP32 module connected to Home Assistant. Can be adapted to ESP8266 or other ESP32 variant. |
 
-The V1 packages, including the Arduino and Raspberry Pi ones, can be found in the `archive` directory.
+The v1 packages, including the Arduino and Raspberry Pi ones, can be found in the [`archive`](./archive/) directory.
 
 For more packaged solutions, see [similar projects](#similar-projects--research). Pull requests are welcome.
 
+## Getting started
+
+Please follow the [ESPHome documentation](https://esphome.io/guides/getting_started_command_line.html) for the basics of ESPHome. You can use the provided [`office-desk-esp32.yaml`](https://github.com/iMicknl/LoctekMotion_IoT/blob/main/packages/office-desk-esp32.yaml) as a boilerplate for your own implementation. This implementation has been created for the ESP32 nodemcu, but can easily be adopted for other platforms and boards.
+
+If you don't have an extra RJ45 port on your desk controller, you will need to use a pass-through solution. At the moment this hasn't been implemented in the latest version, but you can look at the [archive](./archive/esphome/README.md) for the v1 implementation.
+
+## Pin-out
+| RJ45 pin | Name      |  ESP32 |
+| -------- | --------- | --------- | 
+| 8        | +5V (VDD) |  VIN |
+| 7        | GND       | GND |
+| 6        | TX        | TX2 (GPIO17) |
+| 5        | RX        |  RX2 (GPIO16) |
+| 4        | PIN 20    | D23 (GPIO23) |
+| 3        | (unknown) |  |
+| 2        | SWIM      | |
+| 1        | RES       | |
+
+## Known issues
+- Number entity may overshoot. For more accurate positioning, use the provided presets.
+
 ## Research
 
 If you are interested in the internals of the LoctecMotion desk system, have a look at the research below which is composed of my own findings combined with findings of [similar projects](#similar-projects--research).
@@ -131,10 +152,6 @@ Make sure you set the baud rate to 9600. For most LoctekMotion desks, the contro
 source: [alselectro](https://alselectro.wordpress.com/2015/03/03/8051-tutorials-3-interfacing-7-segment-display/)
 
 
-### Known issues
-- Number entity may overshoot. For more accurate positioning, use the provided presets.
-
-
 ### Execute a command
 
 The control box only accepts commands when the 'screen is active'. To activate the screen, `PIN 20` needs to be set to HIGH for about 1 second. The screen gets disabled automatically again after some amount of time receiving no commands.
diff --git a/packages/office-desk-esp32.yaml b/packages/office-desk-esp32.yaml
index afda2a1..e476e65 100644
--- a/packages/office-desk-esp32.yaml
+++ b/packages/office-desk-esp32.yaml
@@ -12,7 +12,7 @@ substitutions:
   encryption_key: "iOZqtvw31Yy6sasRl5h2DElG2VDlqW2WjJEKObVN8bg="
 
 external_components:
-  source: github://iMicknl/LoctekMotion_IoT@v2
+  source: github://iMicknl/LoctekMotion_IoT
   components: [ loctekmotion_desk_height ]
 
 esp32: