HMIP-RGBW Hue & SaturationLevel without function

[LukasMS55]

Hello,

Currently the objects "hue" and "saturationLevel" within IoBroker seem to be without function. If color and saturation level are changed in the HMIP app, these changes are also displayed in IoBroker for the objects, but not vice versa.

**To Reproduce

Input of color selection (Hue, values from 1-360) without function
Input of color saturation (saturationLevel, 1-100) without function

Versions:

• Adapter version: 1.23.3
• JS controller version: 5.0.19
• Node version: 18.17.1
• Operating system: Pi-OS Debian Buster

Thank you :)

[mcm1957]

Just to be sure:
Did you write to the states with ACK==false?

[LukasMS55]

Yes - actually I tried both.

[Apollon77]

Please enable debug log and post a log

[LukasMS55]

Sure, please tell me if something is missing or you need else

edit: not sure why the log is not showing properly but I hope you can use it also that way

`

hmip.0 | 2024-07-06 21:15:10.753 | debug | state change - hue - id "3014F711A00033E0C98DA72C" - value 250 -- | -- | -- | -- hmip.0 | 2024-07-06 21:14:57.401 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.4.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:57.355 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.3.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:57.330 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.2.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:57.326 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.1.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:55.872 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.4.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:55.869 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.3.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:55.865 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.2.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:55.822 | info | State value to set for "hmip.0.devices.3014F711A00033E0C98DA72C.channels.1.hardwareColorTemperatureColdWhite" has to be type "numbern" but received type "number" hmip.0 | 2024-07-06 21:14:55.621 | debug | state change - switchState - id "3014F711A00033E0C98DA72C" - value true `

[mcm1957]

Just as a note for numbern errors:
#571

[Apollon77]

yes I fix now

[Apollon77]

Please try GitHub version. Install, manuall restart adapter and verify please and report back. Then I release it

[LukasMS55]

I did as above mentioned, the state errors (issue #571 ) are solved. The "hue" and "SaturationLevel" problem still persists.

[Apollon77]

Then add a debug log please of such an action

[LukasMS55]

It‘s included in the above mentioned (there are no errors shown), but I can re-do this afternoon.

[Apollon77]

It is also about the debug logging tosee what the adapter sends and why ...

[LukasMS55]

Just to revive the topic: is there anything missing from my side?

[mcm1957]

Please check with current release 1.26.2

[LukasMS55]

With the current version (1.26.4) unfortunately still not working.

[Apollon77]

Please provide a new Debug log

[LukasMS55]

hmip.0 | 2025-01-11 15:12:43.154 | debug | state change - colorTemperature - id "3014F711A00033E0C98DA72C" - value 3000 -- | -- | -- | -- hmip.0 | 2025-01-11 15:12:39.225 | debug | state change - hue - id "3014F711A00033E0C98DA72C" - value 50 hmip.0 | 2025-01-11 15:12:36.374 | debug | state change - saturationLevel - id "3014F711A00033E0C98DA72C" - value 250

It basically doesn't show any error - but also does not do anything.

[Apollon77]

Pleaseprovide a bit longer log ... especially after the changes because the adapter uses a debounce logic to prevent too many updates in a too short timeframe

[LukasMS55]

Hi please find a longer Version:

2025-01-13 17:55:37.079 - debug: hmip.0 (2754) state change - switchState - id "3014F711A00033E0C98DA72C" - value true
2025-01-13 17:55:52.968 - debug: hmip.0 (2754) state change - hue - id "3014F711A00033E0C98DA72C" - value 45
2025-01-13 17:56:06.609 - debug: hmip.0 (2754) state change - colorTemperature - id "3014F711A00033E0C98DA72C" - value 3000
2025-01-13 17:56:34.094 - debug: hmip.0 (2754) state change - saturationLevel - id "3014F711A00033E0C98DA72C" - value 250
2025-01-13 17:57:35.101 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value true
2025-01-13 17:59:45.061 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value false
2025-01-13 18:00:18.012 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value true
2025-01-13 18:02:24.011 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value false
2025-01-13 18:03:35.057 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value true
2025-01-13 18:03:54.006 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value false
2025-01-13 18:05:49.100 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value false
2025-01-13 18:06:40.007 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value true
2025-01-13 18:08:16.045 - debug: hmip.0 (2754) state change - switchState - id "3014F711A0000860C98D7902" - value false
2025-01-13 18:08:43.996 - info: admin.0 (1964) ==> Connected system.user.admin from 
2025-01-13 18:08:44.043 - info: admin.0 (1964) <== Disconnect system.user.admin from admin
2025-01-13 18:08:53.242 - info: admin.0 (1964) ==> Connected system.user.admin from 

I just deleted the IP adresses.

PS: if you can help me how to properly insert the log I would be happy...