diff --git a/installer/README.md b/installer/README.md
index 534905db9..1ae139133 100644
--- a/installer/README.md
+++ b/installer/README.md
@@ -5,6 +5,7 @@ This directory contains instructions and files supporting installation of HNN on
  * [Mac](mac)
  * [Ubuntu](ubuntu)
  * [CentOS](centos)
+ * [Oscar (for Brown students, staff, faculty)](brown_ccv)
 
  If you are running into problems with the instructions given for your machine, we recommed using the VirtualBox VM with HNN pre-installed. Instructions for this downloading and running this VM can be found at the following link (Click 'VirtualBox'):
  * [HNN VirtualBox install instructions](https://hnn.brown.edu/index.php/installation-instructions/)
\ No newline at end of file
diff --git a/installer/brown_ccv/README.md b/installer/brown_ccv/README.md
new file mode 100644
index 000000000..31de09b2c
--- /dev/null
+++ b/installer/brown_ccv/README.md
@@ -0,0 +1,106 @@
+# Installing HNN on Brown's Oscar supercomputer
+**(Brown students, staff, faculty only)**
+
+## Getting an account on Oscar
+Please see  [Create an Account](https://web1.ccv.brown.edu/start/account) on Brown's CCV (Center for Computation and Visualization) site and fill out a new user account form.
+  * Choose an exploratory account
+  * This may take a day or two
+
+## Opening a VNC session
+
+1. Download and run the CCV VNC Client (see [VNC Client](https://web1.ccv.brown.edu/technologies/vnc))
+
+2. Log in using credentials created for you above
+
+3. Choose a machine size to run HNN on. We recommend '4 Cores -- 15 GB Memory -- 4 days'. Click 'Create VNC Session'. You may have to wait why resources are being requested, but eventually you should see a window pop-up displaying a desktop.
+
+4. Launch "Terminal Emulator" from the bottom left. Run the following commands to build HNN and its prerequisites in your home directory. If you've already built HNN and are logging in again, skip to "Running HNN a second time" below.
+
+
+## Setting things up
+```
+module load mpi/openmpi_3.1.3_gcc python/3.6.6 hnn/1.0
+BASE=$HOME/HNN
+mkdir -p $BASE
+```
+
+## Clone the source code for HNN and prerequisites
+```
+cd $BASE
+git clone https://github.com/neuronsimulator/nrn
+git clone https://github.com/neuronsimulator/iv
+git clone https://github.com/jonescompneurolab/hnn
+```
+
+## Build HNN prerequisites
+```
+# build interviews (required for NEURON)
+cd $BASE/iv && \
+    git checkout d4bb059 && \
+    ./build.sh && \
+    ./configure --prefix=$(pwd)/build && \
+    make -j2 && \
+    make install -j2
+
+# build NEURON
+cd $BASE/nrn && \
+    ./build.sh && \
+    ./configure --with-nrnpython=python3 --with-paranrn --disable-rx3d \
+      --with-iv=$(pwd)/../iv/build --prefix=$(pwd)/build && \
+    make -j2 && \
+    make install -j2 && \
+    cd src/nrnpython && \
+    python3 setup.py install --home=$BASE/nrn/build/x86_64/python
+
+# Cleanup compiled prerequisites
+cd $BASE/iv && \
+    make clean
+cd $HOME/nrn && \
+    make clean
+```
+
+## Build HNN
+
+```
+cd $BASE/hnn && \
+    make
+```
+
+## Set commands to run at login
+
+```
+cat <<EOF | tee -a $HOME/.bash_profile > /dev/null
+export PATH=\$PATH:\$BASE/nrn/build/x86_64/bin
+# HNN settings
+if [[ ! "\$(ulimit -l)" =~ "unlimited" ]]; then
+  ulimit -l unlimited
+  if [[ "\$?" -eq "0" ]]; then
+    echo "** Successfully increased max locked memory (for HNN) **"
+  else
+    echo "** Failed to increase max locked memory (for HNN) **"
+  fi
+fi
+EOF
+
+# actually run those commands for this session
+export PATH=$PATH:$BASE/nrn/build/x86_64/bin
+ulimit -l unlimited
+```
+
+## Start HNN
+
+```
+cd $BASE/hnn
+python3 hnn.py hnn.cfg
+```
+
+# Running HNN a second time
+1. If all of the commands above have been run once before, there are only a few commands to run HNN after logging back in
+    ```
+    module load mpi/openmpi_3.1.3_gcc python/3.6.6 hnn/1.0
+    cd $HOME/HNN/hnn
+    python3 hnn.py hnn.cfg
+    ```
+
+2. When the HNN GUI starts up, make sure to change limit the number of cores the amount when requesting the VNC session (e.g. 4 cores)
+    * Click 'Set Parameters' -> 'Run' and change 'NumCores'
diff --git a/installer/brown_ccv/oscar_setup.sh b/installer/brown_ccv/oscar_setup.sh
new file mode 100644
index 000000000..58d566aa8
--- /dev/null
+++ b/installer/brown_ccv/oscar_setup.sh
@@ -0,0 +1,63 @@
+module load mpi/openmpi_3.1.3_gcc python/3.6.6 hnn/1.0
+BASE=$HOME/HNN
+
+mkdir -p $BASE
+cd $BASE
+git clone https://github.com/neuronsimulator/nrn
+git clone https://github.com/neuronsimulator/iv
+git clone https://github.com/jonescompneurolab/hnn
+
+# build interviews (required for NEURON)
+cd $BASE/iv && \
+    git checkout d4bb059 && \
+    ./build.sh && \
+    ./configure --prefix=$(pwd)/build && \
+    make -j2 && \
+    make install -j2
+
+# build NEURON
+cd $BASE/nrn && \
+    ./build.sh && \
+    ./configure --with-nrnpython=python3 --with-paranrn --disable-rx3d \
+      --with-iv=$(pwd)/../iv/build --prefix=$(pwd)/build && \
+    make -j2 && \
+    make install -j2 && \
+    cd src/nrnpython && \
+    python3 setup.py install --home=$BASE/nrn/build/x86_64/python
+
+# setup HNN itself
+cd $BASE/hnn && \
+    make
+
+# cleanup compiled prerequisites
+cd $BASE/iv && \
+    make clean
+cd $BASE/nrn && \
+    make clean
+
+# set command to run at login
+cat <<EOF | tee $HOME/.bash_profile > /dev/null
+export PATH=\$PATH:\$BASE/nrn/build/x86_64/bin
+# HNN settings
+if [[ ! "\$(ulimit -l)" =~ "unlimited" ]]; then
+  ulimit -l unlimited
+  if [[ "\$?" -eq "0" ]]; then
+    echo "** Successfully increased max locked memory (for HNN) **"
+  else
+    echo "** Failed to increase max locked memory (for HNN) **"
+  fi
+fi
+EOF
+
+
+export PATH=$PATH:$BASE/nrn/build/x86_64/bin
+if [[ ! "$(ulimit -l)" =~ "unlimited" ]]; then
+  ulimit -l unlimited
+  if [[ "$?" -eq "0" ]]; then
+    echo "** Successfully increased max locked memory (for HNN) **"
+  else
+    echo "** Failed to increase max locked memory (for HNN) **"
+  fi
+fi
+cd $BASE/hnn
+python3 hnn.py hnn.cfg