An application demo for STM32F4Discovery board using libopencm3 library. This demo uses the 3-axis accelerometer LIS3DSH and the LEDs on the board.
For compiling the project it is necessary to download the libopencm3 library https://github.com/libopencm3/libopencm3. This project folder must be located in the same folder where libopencm3 is located. For compiling the project run:
$ make
and for flashing the STM32F4Discovery board run:
$ make flash
The default toolchain is the same of libopencm3, an arm-none-eabi/arm-elf toolchain.