docs: Slightly restructure dreame uart rooting instructions

docs/_pages/general/rooting-instructions.md

@@ -126,13 +126,13 @@ Then accept at the bottom and `Create Job`. This will send your build to your em
 With the `tar.gz` downloaded, head over to <a href="https://github.com/Hypfer/valetudo-helper-httpbridge" rel="noopener" target="_blank">https://github.com/Hypfer/valetudo-helper-httpbridge</a>
 and download a matching binary for your laptops operating system.
 
-On Windows, a simple double-click should start the utility webserver and create a new `www` directory right next to it.
-It will also print out sample commands explaining how to download from and upload to it. Don't close that window until you're done.
+Now, connect the laptop to the Wi-Fi Access Point of the robot. If you can't see the robots Wi-Fi AP to connect to, it might have disabled itself because 30 minutes passed since the last boot.
+In that case, press and hold the two outer buttons until it starts talking to you.
 
-Copy the downloaded system image to the `www` folder and connect the laptop to the Wi-Fi Access Point of the robot.
+The next step is to start the utility webserver. On Windows, a simple double-click on the exe should do the trick. **Don't close that window until you're done.**
+The server will create a new `www` directory right next to itself as well as print out a few sample commands explaining how to download from and upload to it.
 
-Note: If you can't see the robots Wi-Fi AP to connect to, it might have disabled itself because 30 minutes passed since the last boot.
-In that case, press and hold the two outer buttons until it starts talking to you.
+Make sure that it is listening on an IP in the range of `192.168.5.0/24` and then copy the downloaded `tar.gz` to the newly created `www` folder.
 
 <div markdown="1" class="emphasis-box">
 <div class="alert alert-important" role="alert">