Merge branch 'staging' into brewmaster-4.14

Documentation/admin-guide/kernel-parameters.txt

@@ -2685,6 +2685,8 @@
 			steal time is computed, but won't influence scheduler
 			behaviour
 
+	nopti		[X86-64] Disable kernel page table isolation
+
 	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
@@ -3253,6 +3255,12 @@
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
+	pti=		[X86_64]
+			Control user/kernel address space isolation:
+			on - enable
+			off - disable
+			auto - default setting
+
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.

Documentation/devicetree/bindings/hwmon/jc42.txt

@@ -34,6 +34,10 @@ Required properties:
 
 - reg: I2C address
 
+Optional properties:
+- smbus-timeout-disable: When set, the smbus timeout function will be disabled.
+			 This is not supported on all chips.
+
 Example:
 
 temp-sensor@1a {

Documentation/devicetree/bindings/timer/renesas,cmt.txt

@@ -20,16 +20,16 @@ Required Properties:
 		(CMT1 on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-48-* entries.
 
-    - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4.
-    - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4.
-    - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790.
-    - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790.
-    - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791.
-    - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791.
-    - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793.
-    - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793.
-    - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794.
-    - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794.
+    - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
+    - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
+    - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
+    - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
+    - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
+    - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791.
+    - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793.
+    - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
+    - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
+    - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
 
     - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
     - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
@@ -46,7 +46,7 @@ Required Properties:
 Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
 
 	cmt0: timer@ffca0000 {
-		compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0";
+		compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
 		reg = <0 0xffca0000 0 0x1004>;
 		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
@@ -55,7 +55,7 @@ Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
 	};
 
 	cmt1: timer@e6130000 {
-		compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1";
+		compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
 		reg = <0 0xe6130000 0 0x1004>;
 		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 121 IRQ_TYPE_LEVEL_HIGH>,

Documentation/devicetree/bindings/usb/usb-device.txt

@@ -11,7 +11,7 @@ Required properties:
   be used, but a device adhering to this binding may leave out all except
   for usbVID,PID.
 - reg: the port number which this device is connecting to, the range
-  is 1-31.
+  is 1-255.
 
 Example:
 

Documentation/x86/orc-unwinder.txt

@@ -4,7 +4,7 @@ ORC unwinder
 Overview
 --------
 
-The kernel CONFIG_ORC_UNWINDER option enables the ORC unwinder, which is
+The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is
 similar in concept to a DWARF unwinder.  The difference is that the
 format of the ORC data is much simpler than DWARF, which in turn allows
 the ORC unwinder to be much simpler and faster.

Documentation/x86/x86_64/mm.txt

@@ -1,6 +1,4 @@
 
-<previous description obsolete, deleted>
-
 Virtual memory map with 4 level page tables:
 
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
@@ -14,13 +12,17 @@ ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
 ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
 ... unused hole ...
+				    vaddr_end for KASLR
+fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
+fffffe8000000000 - fffffeffffffffff (=39 bits) LDT remap for PTI
 ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ... unused hole ...
 ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
 ... unused hole ...
 ffffffff80000000 - ffffffff9fffffff (=512 MB)  kernel text mapping, from phys 0
-ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space (variable)
-ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
+ffffffffa0000000 - [fixmap start]   (~1526 MB) module mapping space (variable)
+[fixmap start]   - ffffffffff5fffff kernel-internal fixmap range
+ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
 
 Virtual memory map with 5 level page tables:
@@ -29,26 +31,31 @@ Virtual memory map with 5 level page tables:
 hole caused by [56:63] sign extension
 ff00000000000000 - ff0fffffffffffff (=52 bits) guard hole, reserved for hypervisor
 ff10000000000000 - ff8fffffffffffff (=55 bits) direct mapping of all phys. memory
-ff90000000000000 - ff91ffffffffffff (=49 bits) hole
-ff92000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space
+ff90000000000000 - ff9fffffffffffff (=52 bits) LDT remap for PTI
+ffa0000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space (12800 TB)
 ffd2000000000000 - ffd3ffffffffffff (=49 bits) hole
 ffd4000000000000 - ffd5ffffffffffff (=49 bits) virtual memory map (512TB)
 ... unused hole ...
-ffd8000000000000 - fff7ffffffffffff (=53 bits) kasan shadow memory (8PB)
+ffdf000000000000 - fffffc0000000000 (=53 bits) kasan shadow memory (8PB)
+... unused hole ...
+				    vaddr_end for KASLR
+fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
 ... unused hole ...
 ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ... unused hole ...
 ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
 ... unused hole ...
 ffffffff80000000 - ffffffff9fffffff (=512 MB)  kernel text mapping, from phys 0
-ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
-ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
+ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
+[fixmap start]   - ffffffffff5fffff kernel-internal fixmap range
+ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
 
 Architecture defines a 64-bit virtual address. Implementations can support
 less. Currently supported are 48- and 57-bit virtual addresses. Bits 63
-through to the most-significant implemented bit are set to either all ones
-or all zero. This causes hole between user space and kernel addresses.
+through to the most-significant implemented bit are sign extended.
+This causes hole between user space and kernel addresses if you interpret them
+as unsigned.
 
 The direct mapping covers all memory in the system up to the highest
 memory address (this means in some cases it can also include PCI memory
@@ -58,19 +65,15 @@ vmalloc space is lazily synchronized into the different PML4/PML5 pages of
 the processes using the page fault handler, with init_top_pgt as
 reference.
 
-Current X86-64 implementations support up to 46 bits of address space (64 TB),
-which is our current limit. This expands into MBZ space in the page tables.
-
 We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
 memory window (this size is arbitrary, it can be raised later if needed).
 The mappings are not part of any other kernel PGD and are only available
 during EFI runtime calls.
 
-The module mapping space size changes based on the CONFIG requirements for the
-following fixmap section.
-
 Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all
 physical memory, vmalloc/ioremap space and virtual memory map are randomized.
 Their order is preserved but their base will be offset early at boot time.
 
--Andi Kleen, Jul 2004
+Be very careful vs. KASLR when changing anything here. The KASLR address
+range must not overlap with anything except the KASAN shadow area, which is
+correct as KASAN disables KASLR.

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 14
-SUBLEVEL = 3
+SUBLEVEL = 13
 EXTRAVERSION = -steamos
 NAME = Petit Gorille
 
@@ -373,9 +373,6 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 LDFLAGS_vmlinux =
-CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,)
-CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)
-
 
 # Use USERINCLUDE when you must reference the UAPI directories only.
 USERINCLUDE    := \
@@ -394,21 +391,19 @@ LINUXINCLUDE    := \
 		-I$(objtree)/include \
 		$(USERINCLUDE)
 
-KBUILD_CPPFLAGS := -D__KERNEL__
-
+KBUILD_AFLAGS   := -D__ASSEMBLY__
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common -fshort-wchar \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
-		   -std=gnu89 $(call cc-option,-fno-PIE)
-
-
+		   -std=gnu89
+KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 KBUILD_AFLAGS_MODULE  := -DMODULE
 KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+GCC_PLUGINS_CFLAGS :=
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
@@ -421,7 +416,7 @@ export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KCOV CFLAGS_KASAN CFLAGS_UBSAN
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_KASAN CFLAGS_UBSAN
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
@@ -622,6 +617,12 @@ endif
 # Defaults to vmlinux, but the arch makefile usually adds further targets
 all: vmlinux
 
+KBUILD_CFLAGS	+= $(call cc-option,-fno-PIE)
+KBUILD_AFLAGS	+= $(call cc-option,-fno-PIE)
+CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,)
+CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)
+export CFLAGS_GCOV CFLAGS_KCOV
+
 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
 # values of the respective KBUILD_* variables
 ARCH_CPPFLAGS :=
@@ -801,6 +802,9 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
+# Make sure -fstack-check isn't enabled (like gentoo apparently did)
+KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
+
 # conserve stack if available
 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
@@ -934,8 +938,8 @@ ifdef CONFIG_STACK_VALIDATION
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else
-    ifdef CONFIG_ORC_UNWINDER
-      $(error "Cannot generate ORC metadata for CONFIG_ORC_UNWINDER=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    ifdef CONFIG_UNWINDER_ORC
+      $(error "Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
     else
       $(warning "Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
     endif

arch/Kconfig

@@ -91,7 +91,7 @@ config STATIC_KEYS_SELFTEST
 config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
-	depends on !PREEMPT
+	select TASKS_RCU if PREEMPT
 
 config KPROBES_ON_FTRACE
 	def_bool y

arch/arc/include/asm/uaccess.h

@@ -668,6 +668,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 		return 0;
 
 	__asm__ __volatile__(
+	"	mov	lp_count, %5		\n"
 	"	lp	3f			\n"
 	"1:	ldb.ab  %3, [%2, 1]		\n"
 	"	breq.d	%3, 0, 3f               \n"
@@ -684,8 +685,8 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 	"	.word   1b, 4b			\n"
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
-	: "g"(-EFAULT), "l"(count)
-	: "memory");
+	: "g"(-EFAULT), "r"(count)
+	: "lp_count", "lp_start", "lp_end", "memory");
 
 	return res;
 }

arch/arm/boot/dts/imx53.dtsi

@@ -433,15 +433,6 @@
 				clock-names = "ipg", "per";
 			};
 
-			srtc: srtc@53fa4000 {
-				compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <24>;
-				interrupt-parent = <&tzic>;
-				clocks = <&clks IMX5_CLK_SRTC_GATE>;
-				clock-names = "ipg";
-			};
-
 			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;

arch/arm/configs/exynos_defconfig

@@ -244,7 +244,7 @@ CONFIG_USB_STORAGE_ONETOUCH=m
 CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_STORAGE_ENE_UB6250=m
-CONFIG_USB_UAS=m
+CONFIG_USB_UAS=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y

arch/arm/include/asm/assembler.h

@@ -518,4 +518,22 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
+	.macro	bug, msg, line
+#ifdef CONFIG_THUMB2_KERNEL
+1:	.inst	0xde02
+#else
+1:	.inst	0xe7f001f2
+#endif
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+	.pushsection .rodata.str, "aMS", %progbits, 1
+2:	.asciz	"\msg"
+	.popsection
+	.pushsection __bug_table, "aw"
+	.align	2
+	.word	1b, 2b
+	.hword	\line
+	.popsection
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/kvm_arm.h

@@ -161,8 +161,7 @@
 #else
 #define VTTBR_X		(5 - KVM_T0SZ)
 #endif
-#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
-#define VTTBR_BADDR_MASK  (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_BADDR_MASK  (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_X)
 #define VTTBR_VMID_SHIFT  _AC(48, ULL)
 #define VTTBR_VMID_MASK(size)	(_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
 

arch/arm/include/asm/ptrace.h

@@ -126,8 +126,7 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 /*
  * kprobe-based event tracer support
  */
-#include <linux/stddef.h>
-#include <linux/types.h>
+#include <linux/compiler.h>
 #define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0))
 
 extern int regs_query_register_offset(const char *name);