Revert "Update restic to v0.17.1"

This reverts commit c3e5468.

Signed-off-by: Tesshu Flower <[email protected]>

mover-restic/SOURCE_VERSIONS

@@ -1,2 +1,2 @@
-https://github.com/restic/restic.git v0.17.1 975aa41e1e6a1c88deb501451f23cbdbb013f1da
+https://github.com/restic/restic.git v0.17.0 277c8f5029a12bd882c2c1d2088f435caec67bb8
 https://github.com/minio/minio-go.git v7.0.66 5415e6c72a71610108fe05ee747ac760dd40094f

mover-restic/restic/.github/workflows/docker.yml

@@ -25,7 +25,7 @@ jobs:
         uses: actions/checkout@v4
 
       - name: Log in to the Container registry
-        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567
+        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
         with:
           registry: ${{ env.REGISTRY }}
           username: ${{ github.actor }}

mover-restic/restic/.github/workflows/tests.yml

@@ -66,9 +66,6 @@ jobs:
       GOPROXY: https://proxy.golang.org
 
     steps:
-      - name: Check out code
-        uses: actions/checkout@v4
-
       - name: Set up Go ${{ matrix.go }}
         uses: actions/setup-go@v5
         with:
@@ -142,6 +139,9 @@ jobs:
           echo $Env:USERPROFILE\tar\bin >> $Env:GITHUB_PATH
         if: matrix.os == 'windows-latest'
 
+      - name: Check out code
+        uses: actions/checkout@v4
+
       - name: Build with build.go
         run: |
           go run build.go
@@ -230,14 +230,14 @@ jobs:
     name: Cross Compile for subset ${{ matrix.subset }}
 
     steps:
-      - name: Check out code
-        uses: actions/checkout@v4
-
       - name: Set up Go ${{ env.latest_go }}
         uses: actions/setup-go@v5
         with:
           go-version: ${{ env.latest_go }}
 
+      - name: Check out code
+        uses: actions/checkout@v4
+
       - name: Cross-compile for subset ${{ matrix.subset }}
         run: |
           mkdir build-output build-output-debug
@@ -252,14 +252,14 @@ jobs:
       # allow annotating code in the PR
       checks: write
     steps:
-      - name: Check out code
-        uses: actions/checkout@v4
-
       - name: Set up Go ${{ env.latest_go }}
         uses: actions/setup-go@v5
         with:
           go-version: ${{ env.latest_go }}
 
+      - name: Check out code
+        uses: actions/checkout@v4
+
       - name: golangci-lint
         uses: golangci/golangci-lint-action@v6
         with:

mover-restic/restic/CHANGELOG.md

@@ -1,6 +1,5 @@
 # Table of Contents
 
-* [Changelog for 0.17.1](#changelog-for-restic-0171-2024-09-05)
 * [Changelog for 0.17.0](#changelog-for-restic-0170-2024-07-26)
 * [Changelog for 0.16.5](#changelog-for-restic-0165-2024-07-01)
 * [Changelog for 0.16.4](#changelog-for-restic-0164-2024-02-04)
@@ -36,230 +35,6 @@
 * [Changelog for 0.6.0](#changelog-for-restic-060-2017-05-29)
 
 
-# Changelog for restic 0.17.1 (2024-09-05)
-The following sections list the changes in restic 0.17.1 relevant to
-restic users. The changes are ordered by importance.
-
-## Summary
-
- * Fix #2004: Correctly handle volume names in `backup` command on Windows
- * Fix #4945: Include missing backup error text with `--json`
- * Fix #4953: Correctly handle long paths on older Windows versions
- * Fix #4957: Fix delayed cancellation of certain commands
- * Fix #4958: Don't ignore metadata-setting errors during restore
- * Fix #4969: Correctly restore timestamp for files with resource forks on macOS
- * Fix #4975: Prevent `backup --stdin-from-command` from panicking
- * Fix #4980: Skip extended attribute processing on unsupported Windows volumes
- * Fix #5004: Fix spurious "A Required Privilege Is Not Held by the Client" error
- * Fix #5005: Fix rare failures to retry locking a repository
- * Fix #5018: Improve HTTP/2 support for REST backend
- * Chg #4953: Also back up files with incomplete metadata
- * Enh #4795: Display progress bar for `restore --verify`
- * Enh #4934: Automatically clear removed snapshots from cache
- * Enh #4944: Print JSON-formatted errors during `restore --json`
- * Enh #4959: Return exit code 12 for "bad password" errors
- * Enh #4970: Make timeout for stuck requests customizable
-
-## Details
-
- * Bugfix #2004: Correctly handle volume names in `backup` command on Windows
-
-   On Windows, when the specified backup target only included the volume name
-   without a trailing slash, for example, `C:`, then restoring the resulting
-   snapshot would result in an error. Note that using `C:\` as backup target worked
-   correctly.
-
-   Specifying volume names is now handled correctly. To restore snapshots created
-   before this bugfix, use the <snapshot>:<subpath> syntax. For example, to restore
-   a snapshot with ID `12345678` that backed up `C:`, use the following command:
-
-   ```
-   restic restore 12345678:/C/C:./ --target output/folder
-   ```
-
-   https://github.com/restic/restic/issues/2004
-   https://github.com/restic/restic/pull/5028
-
- * Bugfix #4945: Include missing backup error text with `--json`
-
-   Previously, when running a backup with the `--json` option, restic failed to
-   include the actual error message in the output, resulting in `"error": {}` being
-   displayed.
-
-   This has now been fixed, and restic now includes the error text in JSON output.
-
-   https://github.com/restic/restic/issues/4945
-   https://github.com/restic/restic/pull/4946
-
- * Bugfix #4953: Correctly handle long paths on older Windows versions
-
-   On older Windows versions, like Windows Server 2012, restic 0.17.0 failed to
-   back up files with long paths. This problem has now been resolved.
-
-   https://github.com/restic/restic/issues/4953
-   https://github.com/restic/restic/pull/4954
-
- * Bugfix #4957: Fix delayed cancellation of certain commands
-
-   Since restic 0.17.0, some commands did not immediately respond to cancellation
-   via Ctrl-C (SIGINT) and continued running for a short period. The most affected
-   commands were `diff`,`find`, `ls`, `stats` and `rewrite`. This is now resolved.
-
-   https://github.com/restic/restic/issues/4957
-   https://github.com/restic/restic/pull/4960
-
- * Bugfix #4958: Don't ignore metadata-setting errors during restore
-
-   Previously, restic used to ignore errors when setting timestamps, attributes, or
-   file modes during a restore. It now reports those errors, except for permission
-   related errors when running without root privileges.
-
-   https://github.com/restic/restic/pull/4958
-
- * Bugfix #4969: Correctly restore timestamp for files with resource forks on macOS
-
-   On macOS, timestamps were not restored for files with resource forks. This has
-   now been fixed.
-
-   https://github.com/restic/restic/issues/4969
-   https://github.com/restic/restic/pull/5006
-
- * Bugfix #4975: Prevent `backup --stdin-from-command` from panicking
-
-   Restic would previously crash if `--stdin-from-command` was specified without
-   providing a command. This issue has now been fixed.
-
-   https://github.com/restic/restic/issues/4975
-   https://github.com/restic/restic/pull/4976
-
- * Bugfix #4980: Skip extended attribute processing on unsupported Windows volumes
-
-   With restic 0.17.0, backups of certain Windows paths, such as network drives,
-   failed due to errors while fetching extended attributes.
-
-   Restic now skips extended attribute processing for volumes where they are not
-   supported.
-
-   https://github.com/restic/restic/issues/4955
-   https://github.com/restic/restic/issues/4950
-   https://github.com/restic/restic/pull/4980
-   https://github.com/restic/restic/pull/4998
-
- * Bugfix #5004: Fix spurious "A Required Privilege Is Not Held by the Client" error
-
-   On Windows, creating a backup could sometimes trigger the following error:
-
-   ```
-   error: nodeFromFileInfo [...]: get named security info failed with: a required privilege is not held by the client.
-   ```
-
-   This has now been fixed.
-
-   https://github.com/restic/restic/issues/5004
-   https://github.com/restic/restic/pull/5019
-
- * Bugfix #5005: Fix rare failures to retry locking a repository
-
-   Restic 0.17.0 could in rare cases fail to retry locking a repository if one of
-   the lock files failed to load, resulting in the error:
-
-   ```
-   unable to create lock in backend: circuit breaker open for file <lock/1234567890>
-   ```
-
-   This issue has now been addressed. The error handling now properly retries the
-   locking operation. In addition, restic waits a few seconds between locking
-   retries to increase chances of successful locking.
-
-   https://github.com/restic/restic/issues/5005
-   https://github.com/restic/restic/pull/5011
-   https://github.com/restic/restic/pull/5012
-
- * Bugfix #5018: Improve HTTP/2 support for REST backend
-
-   If `rest-server` tried to gracefully shut down an HTTP/2 connection still in use
-   by the client, it could result in the following error:
-
-   ```
-   http2: Transport: cannot retry err [http2: Transport received Server's graceful shutdown GOAWAY] after Request.Body was written; define Request.GetBody to avoid this error
-   ```
-
-   This issue has now been resolved.
-
-   https://github.com/restic/restic/pull/5018
-   https://forum.restic.net/t/receiving-http2-goaway-messages-with-windows-restic-v0-17-0/8367
-
- * Change #4953: Also back up files with incomplete metadata
-
-   If restic failed to read extended metadata for a file or folder during a backup,
-   then the file or folder was not included in the resulting snapshot. Instead, a
-   warning message was printed along with returning exit code 3 once the backup was
-   finished.
-
-   Now, restic also includes items for which the extended metadata could not be
-   read in a snapshot. The warning message has been updated to:
-
-   ```
-   incomplete metadata for /path/to/file: <details about error>
-   ```
-
-   https://github.com/restic/restic/issues/4953
-   https://github.com/restic/restic/pull/4977
-
- * Enhancement #4795: Display progress bar for `restore --verify`
-
-   When the `restore` command is run with `--verify`, it now displays a progress
-   bar while the verification step is running. The progress bar is not shown when
-   the `--json` flag is specified.
-
-   https://github.com/restic/restic/issues/4795
-   https://github.com/restic/restic/pull/4989
-
- * Enhancement #4934: Automatically clear removed snapshots from cache
-
-   Previously, restic only removed snapshots from the cache on the host where the
-   `forget` command was executed. On other hosts that use the same repository, the
-   old snapshots remained in the cache.
-
-   Restic now automatically clears old snapshots from the local cache of the
-   current host.
-
-   https://github.com/restic/restic/issues/4934
-   https://github.com/restic/restic/pull/4981
-
- * Enhancement #4944: Print JSON-formatted errors during `restore --json`
-
-   Restic used to print any `restore` errors directly to the console as freeform
-   text messages, even when using the `--json` option.
-
-   Now, when `--json` is specified, restic prints them as JSON formatted messages.
-
-   https://github.com/restic/restic/issues/4944
-   https://github.com/restic/restic/pull/4946
-
- * Enhancement #4959: Return exit code 12 for "bad password" errors
-
-   Restic now returns exit code 12 when it cannot open the repository due to an
-   incorrect password.
-
-   https://github.com/restic/restic/pull/4959
-
- * Enhancement #4970: Make timeout for stuck requests customizable
-
-   Restic monitors connections to the backend to detect stuck requests. If a
-   request does not return any data within five minutes, restic assumes the request
-   is stuck and retries it. However, for large repositories this timeout might be
-   insufficient to collect a list of all files, causing the following error:
-
-   `List(data) returned error, retrying after 1s: [...]: request timeout`
-
-   It is now possible to increase the timeout using the `--stuck-request-timeout`
-   option.
-
-   https://github.com/restic/restic/issues/4970
-   https://github.com/restic/restic/pull/5014
-
-
 # Changelog for restic 0.17.0 (2024-07-26)
 The following sections list the changes in restic 0.17.0 relevant to
 restic users. The changes are ordered by importance.

mover-restic/restic/VERSION

@@ -1 +1 @@
-0.17.1
+0.17.0