Merge pull request #2171 from cnti-testcatalog/#2169-transition-to-ne…

…w-installation

installation: CNF Installation (8) Transition to new installation

.gitignore

@@ -8,6 +8,7 @@
 *.swp
 *.swo
 /cnfs
+/installed_cnf_files
 /results
 /tools/chaos_mesh
 /tools/helm

CNF_TESTSUITE_YML_USAGE.md

@@ -66,7 +66,7 @@ Missing config version is presumed to be config version `"v1"`, which is not sup
 
 #### Common Parameters
 
-Common parameters are required for proper functioning of some tests. If these parameters are not set up, corresponding tests will be failed/skipped or would not function properly (in example - whitelist_container_names).
+Common parameters are required for proper functioning of some tests. If these parameters are not set up, corresponding tests will be failed/skipped or would not function properly (in example - white_list_container_names).
 `common: ...`
 
 ##### container_names
@@ -78,7 +78,7 @@ Array of container parameters for rolling version change tests, example:
   rollback_from_tag: 1.8.0
 
 
-##### whitelist_container_names
+##### white_list_container_names
 
 The values of this key are the names of the 'containers' defined in the Kubernetes pod spec of pods that are allowed to be running in privileged mode. (Optional)
 This value is used to allow 'particular' pods to run in privileged mode on the K8s cluster where the CNF is installed.
@@ -118,25 +118,9 @@ image_registry_fqdns:
 
 Described below: [link](#5G-parameters)
 
-#### Dynamic parameters
-
-Dynamic parameters are not meant to be set up manually. They exist due to limitations of testsuite design.
-
-##### source_cnf_dir
-
-Directory where config is located.
-
-##### destintaion_cnf_dir
-
-Internal directory where CNF installation files are copied, currently in `cnfs` folder
-
-##### installation_method
-
-Installation method of the CNF and additional info according to it.
-
 #### Deployments
 
-Deployments are defined as three arrays, each for different installation method. Each array element represents one deployment, and they are meant to represent a single CNF together (Not implemented yet).
+Deployments are defined as three arrays, each for different installation method. Each array element represents one deployment, and they are meant to represent a single CNF together.
 At least one deployment should exist in CNF config for it to be a proper config.
 All info for deployments is used in cnf_setup and cnf_cleanup tasks.
 

INSTALL.md

@@ -235,9 +235,9 @@ For more details on points, see our [POINTS.md](./POINTS.md) documentation.
 
 #### Cleaning Up
 
-Run the following to cleanup the specific cnf-testsuite test (this is assuming you installed the cnf-testsuite.yml in your present working directory):
+Run the following to uninstall the CNF (this is assuming you installed the cnf-testsuite.yml in your present working directory):
 ```
-cnf-testsuite cnf_cleanup cnf-config=./cnf-testsuite.yml
+cnf-testsuite cnf_cleanup
 ```
 You can also run `cleanall` and cnf-testsuite will attempt to cleanup everything.
 

SOURCE_INSTALL.md

@@ -151,7 +151,7 @@ crystal spec
 
 ### Setup
 
-Now that we have a `cnf-testsuite` binary, we can run `setup` to ensure it has all the pre-requisites needed in order to successfully run tests and setup required cnfs/ directory and other files required for cnf-testsuite.
+Now that we have a `cnf-testsuite` binary, we can run `setup` to ensure it has all the pre-requisites needed in order to successfully run tests and setup required installed_cnf_files/ directory and other files required for cnf-testsuite.
 
 - Run the following to setup cnf-testsuite:
   ```
@@ -255,10 +255,10 @@ For more details on points, see our [POINTS.md](./POINTS.md) documentation.
 
 #### Cleaning Up
 
-Run the following to cleanup the specific cnf-testsuite test:
+Run the following to uninstall the CNF:
 
 ```
-./cnf-testsuite cnf_cleanup cnf-config=./cnf-testsuite.yml
+./cnf-testsuite cnf_cleanup
 ```
 
 You can also run `cleanall` and cnf-testsuite will attempt to cleanup everything.

example-cnfs/coredns/README.md

@@ -35,8 +35,8 @@ Run the all the tests
 
 Check the results file
 
-Cleanup the cnf test setup (including undeployment of CoreDNS)
+Uninstall the CNF (including undeployment of CoreDNS)
 
 ```
-./cnf-testsuite cnf_cleanup cnf-path=example-cnfs/coredns
+./cnf-testsuite cnf_cleanup
 ```

example-cnfs/envoy/README.md

@@ -30,8 +30,8 @@ Run the test suite:
 ./cnf-testsuite all
 ```
 
-Envoy cleanup
+Envoy uninstallation
 
 ```
-./cnf-testsuite cnf_cleanup cnf-path=example-cnfs/envoy
+./cnf-testsuite cnf_cleanup
 ```

example-cnfs/ip-forwarder/README.md

@@ -31,19 +31,10 @@ export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite cnf_setup cnf-path=example
 ### Testing
 Run the test suite: `export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite all`
 
-### Automated cleanup
+### Automated uninstallation
 ```
-export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite cnf_cleanup cnf-path=example-cnfs/ip-forwarder/cnf-testsuite.yml
+export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite cnf_cleanup
 ```
 
-### Manual installation
-1. Install helm version 3
-1. Make the cnfs/ip-forwarder diretory 
-1. If you are testing the cnf source, clone the source into the cnfs/ip-forwarder directory
-1. Copy the cnf-testsuite.yml into the cnfs/ip-forwarder directory
-1. Deploy the CNF using helm: `helm install cnfs/ip-forwarder/vpp`
-1. Wait for the installation to finish (all pods are ready)
-1. Run the test suite: `export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite all`
-
 
 

example-cnfs/linkerd2/README.md

@@ -33,8 +33,8 @@ Run the test suite:
 ./cnf-testsuite all
 ```
 
-linkerd cleanup
+linkerd uninstallation
 
 ```
-./cnf-testsuite cnf_cleanup cnf-path=example-cnfs/linkerd2/cnf-testsuite.yml
+./cnf-testsuite cnf_cleanup
 ```

example-cnfs/nsm/README.md

@@ -31,8 +31,8 @@ Run the all the tests
 
 Check the results file
 
-Cleanup the cnf test setup (including undeployment of NSM)
+Uninstall the CNF (including undeployment of NSM)
 
 ```
-./cnf-testsuite cnf_cleanup cnf-config=./example-cnfs/nsm/cnf-testsuite.yml
+./cnf-testsuite cnf_cleanup
 ```

example-cnfs/pantheon-nsm-nat/README.md

@@ -41,9 +41,8 @@ Run the all the tests
 
 Check the results file
 
-Cleanup the cnf test setup (including undeployment of nsm-nat)
+Uninstall the CNF (including undeployment of nsm-nat)
 
 ```
-./cnf-testsuite cnf_cleanup cnf-config=./example-cnfs/pantheon-nsm-nat/cnf-testsuite.yml
-./cnf-testsuite cnf_cleanup cnf-config=./example-cnfs/nsm/cnf-testsuite.yml
+./cnf-testsuite cnf_cleanup
 ```

example-cnfs/pantheon-nsm-nat/nat-cnf/README.md

@@ -31,8 +31,8 @@ crystal src/cnf-testsuite.cr all
 
 Check the results file
 
-Cleanup the cnf test setup (including undeployment of nsm-nat)
+Uninstall the CNF (including undeployment of nsm-nat)
 
 ```
-crystal src/cnf-testsuite.cr cnf_cleanup cnf-config=./example-cnfs/pantheon-nsm-nat/cnf-testsuite.yml
+crystal src/cnf-testsuite.cr cnf_cleanup
 ```

example-cnfs/vpp-3c2n-csp-use-case/README.md

@@ -23,23 +23,14 @@ export KUBECONFIG=$(pwd)/<YourKubeConf> ; ./cnf-testsuite setup
 
 Setup and deploy  service chain
 ```
-export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite example_cnf_setup example-cnf-path=example-cnfs/vpp-3c2n-csp-use-case/cnf-testsuite.yml
+export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite cnf_setup example-cnf-path=example-cnfs/vpp-3c2n-csp-use-case/cnf-testsuite.yml
 ```
 
 ### Testing
 Run the test suite: `export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite all`
 
-### Automated cleanup
+### Automated uninstallation
 ```
-export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite example_cnf_cleanup example-cnf-path=example-cnfs/vpp-3c2n-csp-use-case/cnf-testsuite.yml
+export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite cnf_cleanup
 ```
-
-### Manual installation
-1. Install helm version 3
-1. Make the cnfs/vpp-3c2n-csp-use-case diretory 
-1. If you are testing the cnf source, clone the source into the cnfs/vpp-3c2n-csp-use-case directory
-1. Copy the cnf-testsuite.yml into the cnfs/vpp-3c2n-csp-use-case directory
-1. Deploy the service chain using helm: `helm install vpp-3c2n-csp-use-case cnfs/csp`
-1. Wait for the installation to finish (all pods are ready)
-1. Run the test suite: `export KUBECONFIG=$(pwd)/admin.conf ; ./cnf-testsuite all`
 

spec/5g/core_spec.cr

@@ -18,7 +18,7 @@ describe "Core" do
       result = ShellCmd.run_testsuite("smf_upf_heartbeat verbose")
       (/(PASSED).*(Chaos service degradation is less than 50%)/ =~ result[:output]).should_not be_nil
     ensure
-      result = ShellCmd.run_testsuite("cnf_cleanup cnf-config=sample-cnfs/sample_open5gs/cnf-testsuite.yml") 
+      result = ShellCmd.cnf_cleanup()
       result[:status].success?.should be_true
     end
   end
@@ -29,7 +29,7 @@ describe "Core" do
       result = ShellCmd.run_testsuite("smf_upf_heartbeat verbose baseline_count=300")
       (/(FAILED).*(Chaos service degradation is more than 50%)/ =~ result[:output]).should_not be_nil
     ensure
-      result = ShellCmd.run_testsuite("cnf_cleanup cnf-config=sample-cnfs/sample_open5gs/cnf-testsuite.yml") 
+      result = ShellCmd.cnf_cleanup()
       result[:status].success?.should be_true
     end
   end
@@ -40,7 +40,7 @@ describe "Core" do
       result = ShellCmd.run_testsuite("suci_enabled verbose")
       (/(PASSED).*(Core uses SUCI 5g authentication)/ =~ result[:output]).should_not be_nil
     ensure
-      result = ShellCmd.run_testsuite("cnf_cleanup cnf-config=sample-cnfs/sample_open5gs/cnf-testsuite.yml") 
+      result = ShellCmd.cnf_cleanup()
       result[:status].success?.should be_true
     end
   end
@@ -51,7 +51,7 @@ describe "Core" do
       result = ShellCmd.run_testsuite("suci_enabled verbose")
       (/(FAILED).*(Core does not use SUCI 5g authentication)/ =~ result[:output]).should_not be_nil
     ensure
-      result = ShellCmd.run_testsuite("cnf_cleanup cnf-config=sample-cnfs/sample_open5gs_no_auth/cnf-testsuite.yml") 
+      result = ShellCmd.cnf_cleanup()
       result[:status].success?.should be_true
     end
   end

spec/cluster_setup_spec.cr

@@ -6,8 +6,7 @@ require "cluster_tools"
 
 describe "Cluster Setup" do
   before_each do
-    result = ShellCmd.run_testsuite("cleanup")
-    result[:status].success?.should be_true
+    result = ShellCmd.environment_cleanup()
   end
 
   it "'install_cluster_tools' should give a message if namespace does not exist", tags: ["cluster_setup"]  do

spec/cnf_testsuite_all/cnf_testsuite_spec.cr

@@ -9,8 +9,7 @@ describe CnfTestSuite do
   end
 
   after_all do
-    result = ShellCmd.run_testsuite("samples_cleanup")
-    result[:status].success?.should be_true
+    result = ShellCmd.environment_cleanup()
   end
 
   it "a task should fail with an exit code of 2 when there is an exception", tags: ["security"] do

spec/fixtures/cnf-testsuite-unmapped-keys-and-subkeys.yml

@@ -1,5 +1,5 @@
 ---
-helm_directory: cnfs/coredns/helm_chart/coredns
+helm_directory: installed_cnf_files/coredns/helm_chart/coredns
 release_name: coredns
 helm_repository:
   name: stable 

spec/platform/hardware_and_scheduler_spec.cr

@@ -4,8 +4,7 @@ require "./../../src/tasks/utils/utils.cr"
 
 describe "Platform" do
   before_all do
-    result = ShellCmd.run_testsuite("samples_cleanup")
-    result[:status].success?.should be_true
+    result = ShellCmd.environment_cleanup()
     result = ShellCmd.run_testsuite("setup")
     result[:status].success?.should be_true
   end

spec/platform/platform_spec.cr

@@ -4,19 +4,18 @@ require "../../src/tasks/utils/utils.cr"
 
 describe "Platform" do
   before_all do
-    result = ShellCmd.run_testsuite("samples_cleanup")
-    result[:status].success?.should be_true
+    result = ShellCmd.environment_cleanup()
     result = ShellCmd.run_testsuite("setup")
     result[:status].success?.should be_true
   end
   it "'platform:*' should not error out when no cnf is installed", tags: ["platform"] do
-    result = ShellCmd.run_testsuite("cleanup")
+    result = ShellCmd.environment_cleanup()
     result = ShellCmd.run_testsuite("platform:oci_compliant")
     puts result[:output]
     (/No cnf_testsuite.yml found/ =~ result[:output]).should be_nil
   end
   it "'platform' should not run prerequisites that are prefixed with a ~", tags: ["platform"] do
-    result = ShellCmd.run_testsuite("cleanup")
+    result = ShellCmd.environment_cleanup()
     result = ShellCmd.run_testsuite("platform ~k8s_conformance")
     (/kind=namespace namespace=sonobuoy/ =~ (result[:output] + result[:error])).should be_nil
   end