ladislas/feature/upgrade python

.github/actions/setup/action.yml

@@ -128,7 +128,7 @@ runs:
     - name: Install pip packages
       shell: bash
       run: |
-        pip install --upgrade --upgrade-strategy eager mbed-cli mbed-tools imgtool
+        pip install --upgrade --upgrade-strategy eager -r ./requirements.txt
         pip install --upgrade --upgrade-strategy eager -r ./tools/config/mbed_requirements.txt
         pip install --upgrade --upgrade-strategy eager -r ./extern/mcuboot/scripts/requirements.txt
 

cmake/mbed-cmake.cmake

@@ -86,7 +86,7 @@ endforeach()
 
 # find python (used for memap and several upload methods)
 # -------------------------------------------------------------
-find_package(Python3 3.10 EXACT COMPONENTS Interpreter)
+find_package(Python3 3.10 COMPONENTS Interpreter)
 
 # load the Mbed CMake functions
 # -------------------------------------------------------------

docs/INSTALL.md

@@ -39,7 +39,7 @@ brew install coreutils
 # 💡 don’t forget to add `$(brew --prefix coreutils)/libexec/gnubin` to your `$PATH`
 
 # then the prerequisites
-brew install git curl python
+brew install git curl python3
 
 # and finally the needed tools
 brew install make cmake ninja lcov gcovr stlink ccache open-ocd clang-format
@@ -64,23 +64,17 @@ I recommend the manual install. Make sure to follow the instructions from mbed:
 > <https://os.mbed.com/docs/mbed-os/v6.15/build-tools/install-and-set-up.html>
 
 ```bash
-# install mbed-cli and mbed-tools (mbed-cli2)
-python3 -m pip install -U --user mbed-cli mbed-tools
-
-# then install the important packages
-python3 -m pip install -U --user pyserial intelhex prettytable
-
-# and finally mbed-cli requirements
-python3 -m pip install -U --user -r ./tools/config/mbed_requirements.txt
+python3 -m pip install -U --user -r --break-system-packages ./requirements.txt
+python3 -m pip install -U --user -r --break-system-packages ./tools/config/mbed_requirements.txt
 ```
 
 ### 3. Install arm-none-eabi-gcc
 
 #### macOS
 
 ```bash
-brew tap ArmMbed/homebrew-formulae
-brew install arm-none-eabi-gcc
+brew tap brew tap osx-cross/arm
+brew install arm-gcc-bin
 ```
 
 ## How to use

requirements.txt

@@ -0,0 +1,5 @@
+mbed-cli>=1.10.0,<2.0
+pyserial>=3,<=3.4
+intelhex>=2.3.0,<3.0.0
+prettytable>=2.0,<3.0
+imgtool>=2.0.0,<3.0.0