drivers: gic: Add multiple GIC redistributors regions support

For GIC multiple views feature support, all GIC Re-distributor's
GICR_TYPER.last will be set. Because configuration view-0 can
assign non-contiguous CPUs to views other than 0, in this case
the GIC Redistributors' registers won't seem contiguous.

So the GIC driver should cope with multiple sets of redistributors
like multi-chip scenarios. In this patch we add multiple GIC
redistributor regions support in GIC redistributor iteration.

For more information, refer to the Multi view subsection
in the GIC Technical Reference Manual.
For example:
https://developer.arm.com/documentation/101516/0400/Operation-of-GIC-700/Multi-view

Signed-off-by: Ziad Elhanafy <[email protected]>

drivers/interrupt_controller/intc_gicv3.c

@@ -1,6 +1,7 @@
 /*
  * Copyright 2020 Broadcom
  * Copyright 2024 NXP
+ * Copyright 2025 Arm Limited and/or its affiliates <[email protected]>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -20,6 +21,33 @@
 
 #define DT_DRV_COMPAT arm_gic_v3
 
+#define GIC_V3_NODE	DT_COMPAT_GET_ANY_STATUS_OKAY(DT_DRV_COMPAT)
+
+#define GIC_REDISTRIBUTOR_STRIDE	DT_PROP_OR(GIC_V3_NODE, redistributor_stride, 0)
+#define GIC_NUM_REDISTRIBUTOR_REGIONS	DT_PROP_OR(GIC_V3_NODE, redistributor_regions, 1)
+
+#define GIC_REG_REGION(idx, node_id)				\
+	{							\
+		.base = DT_REG_ADDR_BY_IDX(node_id, idx),	\
+		.size = DT_REG_SIZE_BY_IDX(node_id, idx),	\
+	}
+
+/*
+ * Structure to save GIC register region info
+ */
+struct gic_reg_region {
+	mem_addr_t base;
+	mem_addr_t size;
+};
+
+/*
+ * GIC register regions info table
+ */
+static struct gic_reg_region gic_reg_regions[] = {
+	LISTIFY(DT_NUM_REGS(GIC_V3_NODE), GIC_REG_REGION, (,), GIC_V3_NODE)
+};
+
+
 /* Redistributor base addresses for each core */
 mem_addr_t gic_rdists[CONFIG_MP_MAX_NUM_CPUS];
 
@@ -578,20 +606,34 @@ static inline uint64_t arm_gic_get_typer(mem_addr_t addr)
 static mem_addr_t arm_gic_iterate_rdists(void)
 {
 	uint64_t aff = arm_gic_mpidr_to_affinity(GET_MPIDR());
+	uint32_t idx;
 
-	for (mem_addr_t rdist_addr = GIC_RDIST_BASE;
-		rdist_addr < GIC_RDIST_BASE + GIC_RDIST_SIZE;
-		rdist_addr += 0x20000) {
-		uint64_t val = arm_gic_get_typer(rdist_addr + GICR_TYPER);
-		uint64_t gicr_aff = GICR_TYPER_AFFINITY_VALUE_GET(val);
+	/* Skip the first array entry as it refers to the GIC distributor */
+	for (idx = 1; idx < GIC_NUM_REDISTRIBUTOR_REGIONS + 1; idx++) {
+		uint64_t val;
+		mem_addr_t rdist_addr = gic_reg_regions[idx].base;
+		mem_addr_t rdist_end = rdist_addr + gic_reg_regions[idx].size;
 
-		if (arm_gic_aff_matching(gicr_aff, aff)) {
-			return rdist_addr;
-		}
+		do {
+			val = arm_gic_get_typer(rdist_addr + GICR_TYPER);
+			uint64_t gicr_aff = GICR_TYPER_AFFINITY_VALUE_GET(val);
 
-		if (GICR_TYPER_LAST_GET(val) == 1) {
-			return (mem_addr_t)NULL;
-		}
+			if (arm_gic_aff_matching(gicr_aff, aff)) {
+				return rdist_addr;
+			}
+
+			if (GIC_REDISTRIBUTOR_STRIDE > 0) {
+				rdist_addr += GIC_REDISTRIBUTOR_STRIDE;
+			} else {
+				/*
+				 * Skip RD_base and SGI_base
+				 * In GICv3, GICR_TYPER.VLPIS bit is RES0 and can can be ignored
+				 * as there are no VLPI and reserved pages.
+				 */
+				rdist_addr += KB(64) * 2;
+			}
+
+		} while ((!GICR_TYPER_LAST_GET(val)) && (rdist_addr < rdist_end));
 	}
 
 	return (mem_addr_t)NULL;

drivers/interrupt_controller/intc_gicv3_priv.h

@@ -1,5 +1,6 @@
 /*
  * Copyright 2020 Broadcom
+ * Copyright 2025 Arm Limited and/or its affiliates <[email protected]>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -25,13 +26,6 @@
 #define GIC_BASER_SHARE_INNER		0x1UL /* Inner Shareable */
 #define GIC_BASER_SHARE_OUTER		0x2UL /* Outer Shareable */
 
-/*
- * GIC Register Interface Base Addresses
- */
-
-#define GIC_RDIST_BASE	DT_REG_ADDR_BY_IDX(DT_INST(0, arm_gic), 1)
-#define GIC_RDIST_SIZE	DT_REG_SIZE_BY_IDX(DT_INST(0, arm_gic), 1)
-
 /* SGI base is at 64K offset from Redistributor */
 #define GICR_SGI_BASE_OFF		0x10000
 

dts/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -1,7 +1,53 @@
+#
+# Copyright 2025 Arm Limited and/or its affiliates <[email protected]>
+#
 # SPDX-License-Identifier: Apache-2.0
+#
 
 description: ARM Generic Interrupt Controller v3
 
 compatible: arm,gic-v3
 
 include: arm,gic.yaml
+
+properties:
+  redistributor-stride:
+    type: int
+    description:
+      If using padding pages, specifies the stride of consecutive
+      redistributors which is the distance between consecutive redistributors in
+      memory. Must be a multiple of 64kB. Required if the distance between
+      redistributors is not the default 128kB.
+
+  redistributor-regions:
+    type: int
+    description:
+      The number of independent contiguous regions occupied by the redistributors.
+      The term "regions" refers to distinct memory segments or areas allocated
+      for redistributors within the system memory. The number of redistributor
+      regions and their sizes are hardware-specific. Required if more than one
+      such region is present.
+
+examples:
+  - |
+    gic: interrupt-controller@2cf00000 {
+      compatible = "arm,gic-v3", "arm,gic";
+      reg = <0x2f000000 0x10000>,  /* GICD */
+            <0x2f100000 0x200000>;  /* GICR */
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      status = "okay";
+    };
+
+  - |
+    gic: interrupt-controller@2c010000 {
+      compatible = "arm,gic-v3", "arm,gic";
+      redistributor-stride = <0x40000>;  /* 256kB stride */
+      redistributor-regions = <2>;
+      reg = <0x2c010000 0x10000>,  /* GICD */
+            <0x2d000000 0x800000>,  /* GICR 1: CPUs 0-31 */
+            <0x2e000000 0x800000>;  /* GICR 2: CPUs 32-63 */
+      interrupt-controller;
+      #interrupt-cells = <4>;
+      status = "okay";
+    };